In the outdoor lighting project of LED, LED line lamp is a kind of lamp with more applications. Sometimes the LED line lamp will be installed in a more conspicuous place. If it is not good, it will affect the appearance. At this time, how to make seamless docking is confused. Live a lot of people, can this problem be solved?
When the led line lamp is used for interior decoration, the installation is very simple. The back of the led line lamp is made of 3M double-sided adhesive with strong adhesion. When installing, you can directly tear off the sticker on the surface of 3M double-sided adhesive tape, and then fix the line light in need of installation. The place is just fine with your hand.
When the outdoor lighting engineering manufacturer's led line lamp is used for outdoor installation, it pays more attention to the waterproofing and firm installation of the lamp. This is mainly because the led line lamp will be subjected to wind and rain. If it is fixed with 3M glue, the 3M adhesive will be reduced for a long time and the LED line light will fall off, which will cause safety problems. Therefore, the outdoor installation often adopts the method of fixing the card slot. The place to be cut and connected is the same as the installation in the room. It only needs to be equipped with waterproof glue to consolidate the waterproof effect of the connection point, and then fixed with a special fixed clip. Drill or use a plastic expansion tube and a screw to secure the clip.
The production process of outdoor lighting engineering lamps is difficult. The width of the production line of LED line lamps manufacturers is between 1m and 1.5m. This is a workbench set for conventional standard products. If it is necessary to produce more than 2m. The LED line light, from a production point of view, will greatly increase labor costs and production difficulty. Therefore, many line lamp manufacturers are reluctant to customize LED line lights with a length of more than 2 meters.
Too long LED line light transportation process will increase the risk factor of product loss. In the past transportation risk assessment, Zhongshan Ruiyi Lighting knows that the longer the product length, the higher the damage rate, although it has already been done before transportation. A series of packaging design to protect it, but it is also difficult to avoid the damage caused by the logistics after multiple circulations. At this time, there will be customers asking: "The street light is also very long. Why can't the line light be like a street light? How about transportation?", very good question, the street lamp is very long, but it is the length of the pole, the material of the pole is generally thick steel or aluminum alloy, and the lamp body is thick, the strength is very high, without glass, and The lamp body of the LED line lamp is thin, and the resistance to external force is reduced as the length is lengthened.