In the process of installing outdoor lighting LED street lights, the standard installation method is the premise to ensure our correct use. Below we introduce you to the specifications for the correct installation of LED street lights.
The installation height of the LED street light of the same road (from the light source to the ground), the elevation angle, and the direction of the lamp should be consistent. The foundation pit excavation size shall comply with the design regulations. The foundation concrete strength grade shall not be lower than C20. The cable sheath in the foundation shall pass through the foundation center and shall extend 30-50 mm beyond the foundation plane. Water must be removed from the pit before casting the reinforced concrete foundation. Metal components such as lampposts, lamp arms, hoops, bolts, and pressure plates used for installation of LED street lamps shall be hot-dip galvanized. The quality of anti-corrosion shall comply with the relevant provisions of the current national standards.
The longitudinal centerline of the LED lamp installation and the longitudinal centerline of the lamp arm should be consistent. The horizontal horizontal line of the lamp should be parallel to the ground. After tightening, the visual inspection should be without tilting. The LED lamp holder is fixed firmly, and the adjustable lamp holder should be adjusted to the correct position according to the design. The lamp terminal wiring should meet the requirements. There shall be no joints in the LED street lamp arm, lamp panel and lamp pole. The threading orifice or nozzle shall be smooth and burr-free, and shall be insulated or sleeved. The length of the strap shall not be less than 200mm. Various nuts are fastened, and gaskets and spring pads should be added. The nut must not be less than two pitches after tightening.
The above is the specification of the correct installation of LED lighting for outdoor lighting. If you have any questions, please feel free to contact us. We will continue to update you with more instructions. You can follow our website for more information.
Outdoor lighting street lamp manufacturers can help you understand the classification of some street lamps;
1. According to the height of the street lamp: high pole light, middle pole light, road light, garden light, lawn light, underground light;
2. According to the material of street lamp pole: hot-dip galvanized iron street lamp, hot-dip galvanized steel street lamp and stainless steel street lamp;
3. According to the street light source: sodium lamp street lamp, LED street lamp, energy-saving street lamp, new type of Suoming xenon street lamp;
4, according to the modeling points: Chinese lights, antique lights, landscape lights, one-arm street lights, two-arm street lights;
5, according to the power supply method: city circuit lights, solar street lights, wind and solar complementary street lights.